Analysis & Design of Submarine Structures

Course Brochure

8th-10th April 2024

ABOUT THE COURSE

Most submarine designs are weight critical, especially as operational diving depth increases. It follows that designers will strive to select an available high strength low density material compatible with good fabricability and toughness. Toughness is required not only for the usual low temperature reasons, but also to resist high dynamic loads from depth charge attack. High strength steels have proved to be reasonably satisfactory, main limitation being how to achieve adequate weldability and toughness for military submarines with steels above about 700N/mm2 proof stress. More exotic materials would be considered for depths exceeding 1000m say. At really great depths the required pressure hull thicknesses can become so large that buckling ceases to be a problem even with low modulus materials and frames can effectively be dispensed with. In many respects the design then becomes simpler and the conventional safety factor can be reduced. This course is meant to provide comprehensive coverage of structural design and also concentrate on philosophy and underlying essentials and strength formulations for design.

WHO SHOULD ATTEND

The course is intended for Engineers, Operations managers, Fabricators, Applied Scientists and Technologists interested in submarine design.

COST

The registration fee of the work shop will be £895 plus VAT (UK ONLY) which includes course notes.

PAYMENT

Payments can be made by cheque (made) payable to ASRANet Ltd.), cash or bank transfer. Please enquire for details.

Contact Us

ASRANet Limited W www.ASRANet.co.uk/courses

Email:  info@asranet.co.uk

Telephone
General enquiries: +44 (0)7764575990
Payment enquiries: +44 (0) 7712731566

Register Now